Gang DTF Transfer (11in x 50in)
$25.00
Heat-press settings
You MUST have a heat press. These transfers cannot be applied with an iron.
Time: 10 seconds / 5 seconds
Temperature: 300 degrees Fahrenheit
Pressure: Heavy Pressure
1) Place garment on heat press and
direct to film transfer onto garment
with image (right reading) facing up.
2) Press with heavy pressure at 300°F
for 10 seconds. You should see the
imprint of the fibers in the design
when finished. Increase pressure if you
do not see the fibers.
3) Quickly peel film from garment
by the corner with the thickest
part of the design – fine lines are more
likely to lift,
4) Place garment on heat press,
cover with parchment paper
or Teflon sheet and press for 5 seconds.
*CONTACT US FOR HELP*
Every heat press is different. These are
generic instructions based on our own
usage for our apparel business & press.
Our DTF transfers are printed to order and can be stored up to 6 months or more. These transfers are COLD PEEL and can only be applied with a heat press. Please use a temperature gun to make sure your press temperature is accurate. We are not responsible for any pressing issues due to inaccurate temperature or pressure.
Additional information
Weight | 3 oz |
---|---|
Dimensions | 11 × 3 × 2 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.