Description

*Not a complete shirt, only transfer design*

Heat-press settings

You MUST have a heat press. These transfers cannot be applied with an iron.

 

Time: 10 seconds / 5 seconds

 

Temperature: 300 degrees Fahrenheit

 

Pressure: Heavy Pressure

 

1) Place garment on heat press and

direct to film transfer onto garment

with image (right reading) facing up.

2) Press with heavy pressure at 300°F

for 10 seconds. You should see the

imprint of the fibers in the design

when finished. Increase pressure if you

do not see the fibers.

3) Quickly peel film from garment

by the corner with the thickest

part of the design – fine lines are more

likely to lift,

4) Place garment on heat press,

cover with parchment paper

or Teflon sheet and press for 5 seconds.

*CONTACT US FOR HELP*

Every heat press is different. These are

generic instructions based on our own

usage for our apparel business & press.

Our DTF transfers are printed to order and can be stored up to 6 months or more. These transfers are HOT PEEL and can only be applied with a heat press. Please use a heat gun to make sure your press temperature is accurate. We are not responsible for any pressing issues due to inaccurate temperature or pressure.